|
|
|
|
|
|
|
|
|
|
|
|
|
|
AmeriVent Fixed Storm Collar, Vent Hole Size: 3 in, Material Gauge: 0.18 in, Steel, Galvanized, Dimensions: 3-1/2 in ID x 6-5/8 in OD x 1-7/16 in H, Installation Type: Wall, Suitable for: Type B Gas Vent
|
AmeriVent Fixed Storm Collar, Vent Hole Size: 4 in, Material Gauge: 0.18 in, Steel, Galvanized, Dimensions: 4-1/2 in ID x 7-5/8 in OD x 1-1/2 in H, Installation Type: Wall, Suitable for: Type B Gas Vent
|
AmeriVent Vent Collar, Vent Hole Size: 6 in, Roof Pitch: 1/12, Material Gauge: 0.018 in, Steel, Galvanized, Dimensions: 6-5/8 in ID x 12-7/8 in OD, Installation Type: Wall, Suitable for: Type B Gas Vent
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AmeriVent Vent Collar, Vent Hole Size: 3 in, Material Gauge: 0.018 in, Steel, Galvanized, Dimensions: 3-5/8 in ID x 8-3/4 in OD, Installation Type: Wall, Suitable for: Type B Gas Vent
|
AmeriVent Vent Collar, Vent Hole Size: 4 in, Material Gauge: 0.018 in, Steel, Galvanized, Dimensions: 4-5/8 in ID x 8-3/4 in OD, Installation Type: Wall, Suitable for: Type B Gas Vent
|
AmeriVent Vent Collar, Vent Hole Size: 5 in, Material Gauge: 0.018 in, Steel, Galvanized, Dimensions: 5-5/8 in ID x 10-7/8 in OD, Installation Type: Wall, Suitable for: Type B Gas Vent
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bracket for supporting the chimney pipe offsets, securing outdoor chimney to exterior wall.
|
AmeriVent Fixed Storm Collar, Vent Hole Size: 5 in, Material Gauge: 0.18 in, Steel, Galvanized, Dimensions: 5-1/2 in ID x 8-5/8 in OD x 1-5/8 in H, Installation Type: Wall, Suitable for: Type B Gas Vent
|
AmeriVent Fixed Storm Collar, Vent Hole Size: 6 in, Material Gauge: 0.18 in, Steel, Galvanized, Dimensions: 6-1/2 in ID x 9-5/8 in OD x 1-1/2 in H, Installation Type: Wall, Suitable for: Type B Gas Vent
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selkirk Roof Flashing, Pipe Size: 4 in, Base Size: 16 x 13-1/4 in, Roof Pitch: Flat to 6/12, Steel, 16 in OAL, 13-1/4 in OAW, 7-3/4 in OAH, Suitable for: 4 in Dia Pipe
|
The standard flashing fits flat to 5/12 pitch roof and is made of double-seamed construction for protection from leakage. For a standard flashing with a 6 in skirt, the model number reads the size and EFFU or RFFU.
|
The standard flashing fits flat to 5/12 pitch roof and is made of double-seamed construction for protection from leakage. For a standard flashing with a 6 in skirt, the model number reads the size and EFFU or RFFU.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The standard flashing fits flat to 5/12 pitch roof and is made of double-seamed construction for protection from leakage. For a standard flashing with a 6 in skirt, the model number reads the size and EFFU or RFFU.
|
The increaser is used to increase vent size. A max of four-step of increase.
|
Lightweight air-insulated, double-wall metal construction with an inner pipe of reflecting aluminum and an outer pipe of corrosion-resistant galvanized steel for strength, safety and durability. Adjustable from 0 to 45 deg.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjusts for various wall thicknesses from 4 to 6 in. Provides proper clearance for vent from combustibles and serves as a firestop.
|
|
Lightweight air-insulated, double-wall metal construction with an inner pipe of reflecting aluminum and an outer pipe of corrosion-resistant galvanized steel for strength, safety and durability. Adjustable from 0 to 45 deg.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjusts for various wall thicknesses from 4 to 6 in. Provides proper clearance for vent from combustibles and serves as a firestop.
|
The AmeriVent cap is the first engineered vent cap to gain recognition across the country for its performance. Millions of them are now installed on homes and business structures to protect against wind conditions that can cause waste gases to spill back into the structure through the appliance draft hood. The AmeriVent cap is UL Listed and its patented design of ports and baffles keep rain and debris out of the vent. In addition, AmeriVent caps permit termination of vents at the minimum height necessary above the roof surface. The AmeriVent cap is used as a ventilation cap as well as a Type B gas vent termination.
|
Use as a ventilation cap as well as Type B vent termination. Protects against waste gases spilling back into the structure through the appliances draft hood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The adjustable 90 deg elbow is constructed of four sections for smoother bends and less resistance. The elbow adjusts from 0 to 90 deg easily in order to clear rafters or ceiling joists.
|
The AmeriVent cap is the first engineered vent cap to gain recognition across the country for its performance. Millions of them are now installed on homes and business structures to protect against wind conditions that can cause waste gases to spill back into the structure through the appliance draft hood. The AmeriVent cap is UL Listed and its patented design of ports and baffles keep rain and debris out of the vent. In addition, AmeriVent caps permit termination of vents at the minimum height necessary above the roof surface. The AmeriVent cap is used as a ventilation cap as well as a Type B gas vent termination.
|
Adjusts for various wall thicknesses from 4 to 6 in. Provides proper clearance for vent from combustibles and serves as a firestop.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjusts for various wall thicknesses from 4 to 6 in. Provides proper clearance for vent from combustibles and serves as a firestop.
|
The standard flashing fits flat to 5/12 pitch roof and is made of double-seamed construction for protection from leakage. For a standard flashing with a 6 in skirt, the model number reads the size and EFFU or RFFU.
|
The adjustable 90 deg elbow is constructed of four sections for smoother bends and less resistance. The elbow adjusts from 0 to 90 deg easily in order to clear rafters or ceiling joists.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The adjustable 90 deg elbow is constructed of four sections for smoother bends and less resistance. The elbow adjusts from 0 to 90 deg easily in order to clear rafters or ceiling joists.
|
|
|
